Error code 275
Rotary speed of the left drill shaft too low
Alarm at Maistro.Maistro (275-3)
since version 10.13
When does the alarm occur?
The speed of the left drill shaft is lower than the limit set in the configuration under rotary speed 1.
Does a Drilling error (drilling drop-out) occur?
No.
What to do?
- Check the set limit under rotary speed 1 for correctness.
- The working speed must possibly be increased.
- Check the sensor.
- If the sensor is defective or not installed, set the rotary speed 1 to 0.
- For hydraulic drill shaft drive:
- Check the function of the motor
- Check the transmission ratio
- For ground drive:
- Check the slip of the drive wheel
- Check the transmission ratio.
After what time is the alarm repeated?
30 sec.
Is there an audible indication?
3 successive acoustic signals
How is the alarm confirmed?
Press ESC to confirm
Terms of use
Note: The assistance operations given in the present application may only be carried out observing the safety notes in the operating instructions of the corresponding machine. Compensation claims for damages due to non-observance of the operating instructions are excluded.